CAB110 Cable Drawing for X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

​CAB110 Cable for MELSEC Q Transparent mode for X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

• CAB110-3m.pdf

CAB105 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

Cable between Allen Bradley Micrologix and X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 3 meters.

• CAB105_3m.pdf

CAB106 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

Cable between OMRON Host Link and X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 3 meters.

• CAB106_3m.pdf

CAB107, 25-pol to 9-pol adapter, Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, iX Panel TxA/B/C operator panel

CAB107  9pin Dsub to 25pin Dsub, for using EXTER/E1000 422/485 cables on X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 0,2 meters.

• CAB107.pdf

CAB109 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C iX operator panel

CAB109 Y-split cable to utilize more than two COM ports on X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 2 x 0,1 meters.

• CAB109.pdf

iX Panel T7A Outline Drawing/Panel Cut-Out

• EZHMI-Z1141-001B.dwg
• EZHMI-Z1141-001B.dxf
• EZHMI-Z1141-001B.pdf
• T7A_Cutout.pdf
• T7A_outline.eps
• T7A_outline.pdf

iX Panel T7A 3D Drawing

• iX_Panel_T7A-col.stp

iX Panel T4A Outline Drawing/Panel Cut-Out

• T4A_Cutout.pdf
• T4A_outline.eps
• T4A_outline.pdf

iX Panel T4A 3D Drawing

• iX_Panel_T4A-col.stp

iX Panel T10A Outline Drawing/Panel Cut-Out

• T10A_Cutout.pdf
• T10A_outline.eps
• T10A_outline.pdf

iX Panel T10A 3D Drawing

• iX_Panel_T10A-col.stp

CAB104 Cable Drawing forX2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

Cable between PC standard RS232 and X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C 

Cable length: 3 meters.

• CAB104_3m.pdf

CAB103 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

 Cable between MELSEC FX1/2/3-series and X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 3 meters in drawing CAB103_3m.pdf.

Cable length: 10 meters in drawing CAB103_10m.pdf.

Cable length: 15 meters in drawing CAB103_15.pdf.

• CAB103_10m.pdf
• CAB103_15m.pdf
• CAB103_3m.pdf

CAB102 Cable Drawing for TxA / TxB / TxC iX operator panel

CAB102 cable drawing for T4A / T7A / T10A

TxB / TxC MPI Direct are not supported.

Cable length: 3 meters.

Can be used with following systems:

SIMATIC 300/400 MPI Direct Driver

SIMATIC 200 PPI Driver

SIMATIC 1200 N/A only ethernet use ISO-on-TCP driver. 

• CAB102_3m.pdf

CAB101 Cable Drawing for X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

CAB101 Cable between MELSEC Q and  X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 3 meters.

• CAB101_3m.pdf

CAB153 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

RS422 panel side termination plug​
Used when RS422 point to point communication is used 

CAB150 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, iX Panel TxA/B/C operator panel

​3 way splitter cable
Used when 2xRS485 are needed

• CSS-DWG-1509005 100-0526 CAB150.pdf

CAB100 Cable Drawing for X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

Cable between GE Fanuc and X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 3 meters.

• CAB100_3m.pdf

Start-up: iX TxA/TxB – Programmable I/O (PIO) NA-9379 (KI00343)

This document explains how to setup ethernet connection with programmable I/O (PIO).

Driver, iX - PIO:       Driver_iX_ModbusMaster5_14_02_beta.zip
iX T7A project:       PIO_TCPSlavFB_T7A_20141007.zip
CODESYS project:   PIO_TCPSlavFB_T7A_20141007_Codesys.zip

• Driver_iX_ModbusMaster5_14_02_beta.zip
• KI00343.pdf
• PIO_TCPSlavFB_T7A_20141007.zip
• PIO_TCPSlavFB_T7A_20141007_Codesys.zip

IX terminals delete datalog export files from internal or usb memory

IX dev. 2.0 b463 
Created on IX T10A terminal b803

Attached project show how to delete all files in the catalogues where the datalogs are exported when using the action "export to CSV".
The exaple covers bothe internal filesystem, and USB. 

Path to different drives : (TxA\TxB)

Internal filesystem:   @"FlashDrive\Project\Project Files\DatabaseExport\Data Loggers"
USB memory:             @"Hard Disk\DatabaseExport\Data Loggers"
SD memory:            & nbsp;  @"Storage Card\DatabaseExport\Data Loggers"

• DeleteFiles_T10A.zip

iX Developer Samples

• Sample_Alarm.zip
• Sample_Diagnostic.zip
• Sample_MediaPlayer.zip
• Sample_Recipe.zip
• Sample_Security.zip
• Sample_Trend.zip

Start-up document, Transparent mode with iX Developer 2.0 (KI00318 rev. A)

This document explains how too set up transparent and passthrough mode in iX Developer 2.0.

• KI00318.pdf
• KI00318A.pdf

2015 HMI catalogue-CN

• 2015 HMI catalogue-CN.pdf

TxA, X2 base image 1.12 b1335 (Current version)

• IML_X2 base_TxA_TxF-2_b1335.exe
• Last_Minutes_Notes_iX_TxA_X2base_PIEN281H.pdf
• Release_Notes_iX_TxA_X2base_PIEN284H.pdf

T7AM RS certification 15090600 (PROD CERT - 1034990 - 1 - A1) - 1

• T7AM RS certification 15090600 (PROD CERT - 1034990 - 1 - A1) - 1.pdf

Loyd's Register Type Approval Certificate T7AM (PROD CERT - 1029198 - 1 - A1) - 1

• Loyd's Register Type Approval Certificate T7AM, T7A-AL-HT (PROD CERT - 1029198 - 1 - A1) - 1.pdf

DNV GL Certificate iX T4A , iX T7A, iX T10A , CiX-CAN

DNV GL Certificate iX T4A , iX T7A ;iX T10A , +CiX-CAN

• TAA00001YM.PDF

DNV Certificate iX T7AM +CiX-CAN

DNV Certificate iX T7AM, +CiX-CAN

Apply to:
630002502 iX T7AM
630003112 iX T7AM-CAN

• DNV Certificate-13497.pdf

GL Certificate TxA (PROD CERT - 1025206 - 1 - A1) - 1

• GL Certificate TxA Rev. D1 (PROD CERT - 1025206 - 1 - A1) - 1.pdf

Green Passport iX TxA

• Green Passport Declaration iX T10A (PROD CERT - 1013750 - 1 - A1) - 1.pdf
• Green Passport Declaration iX T4A (PROD CERT - 1013749 - 1 - A1) - 1.pdf
• Green Passport Declaration iX T7A (PROD CERT - 1012858 - 1 - A1) - 1.pdf
• Green Passport Declaration iX TxAx (PROD CERT - 1029982 - 1 - A1) - 1.pdf

iX T7AM GL certification 60 108 - 13 HH (PROD CERT - 1031361 - 1 - A1) - 1

• iX T7AM GL certification 60 108 - 13 HH (PROD CERT - 1031361 - 1 - A1) - 1.pdf

iX T7AM BV Bureau Veritas Certificate 37193!A0 (PROD CERT - 1031965 - 1 - A1) - 1

• iX T7AM BV Bureau Veritas Certificate 37193!A0 (PROD CERT - 1031965 - 1 - A1) - 1.PDF

iX T7AM ABS PDA Certificate 14-HG1139922-PDA (PROD CERT - 1031909 - 1 - A1) - 1

• iX T7AM ABS PDA Certificate 14-HG1139922-PDA (PROD CERT - 1031909 - 1 - A1) - 1.pdf
• iX T7AM ABS PDA Rules_Description_Info for 14-HG1139922-PDA (PROD CERT - 1031910 - 1 - A1) - 1.pdf

Declaration of conformity iX Panel TxA

• Declaration of conformity iX Panel TxA PIEN292.pdf

UL Certificate iX TxA, TAx, EPC TAxAM

UL certificate
iX T4A
iX T7A
iX T7AM
iX T10A
iX TA70
iX TA100
iX TA150
EPC TA 70AM
EPC TA100AM
EPC TA150AM

• UL TxA_TAx_EPC TAxAM.pdf

iX Panel T7A Declaration of Conformity EMC

• EG_Confirmation_iX_Panel_T7A.pdf

iX Panel T4A Declaration of Conformity EMC

• EG_Confirmation_iX_Panel_T4A.pdf

iX Panel T10A Declaration of Conformity EMC

• EG_Confirmation_iX_Panel_T10A.pdf

Declaration of conformity EMC ciX-DP

 ciX-DP Module

• DOC-Z9116-030A_Declaration of conformity EMC_CiX-DP.pdf

DNVGL Type Approval Certificate TxA,T7AM

​DNVGL Type Approval Certificate TxA,T7AM

• TAA00001YM (PROD CERT - 1356156 - 1 - A1) - 1.PDF

UL E192000 for X2Base ,TxA, Exter

​UL E192000 for X2Base ,TxA, Exter

• X2 base TxA Exter UL E192000.PDF

TxA panel T4A, T7A, T10A batteries, do they need to be replaced?

TxA panel T4A, T7A, T10A batteries, do they need to be replaced?

No, the batteries for the real-time-clock inside TxA panels are all rechargable.
The panel needs to be powered up for a while in order to charge the battery, but after that the panel retains time and date information.
If you leave the panel without power for a prolonged time, the rechargable battery will run out and the panel will loose the time and date.

TxA and web browser

Web browser is not included in the microsoft CE 6.0 core licence used in the TxA terminals.
The tool is blocked in IX developer obviously.

It is neighter possible to start a browser  from a "RUN" action, since it is not included in the Terminals OS \ image

iX - TxA/TxB/TxC/X2 Modbus to Pluto safety PLC

​Previously, E1000 users used the Modbus master driver to communicate with a Jokab Safety Pluto safetyPLCs.

That option is no longer availible, due software related resons.

The Modbus master driver (V5.xx.xx) does not have any support for forcing the RTS signal high (cmd line option XRTS).

Workaround 1:

It´s possible to use the Modbus/TCP-driver in iX if a Westermo EDW-100 is connected to the Pluto. The standard Pluto RS232-cable is directly connected to the EDW-100 serial port, see picture.

The configuration of the EDW-100 is in the attached in the file edw100.ini (just change the IP to something that matches your network).

An example project for iX (made in version 2.10) is attached in the file Pluto_iX.zip (made for a T7A), the variables used in the example are based on the example Pluto PLC-project Pluto_PLCcode.sps.
Also tested and working with X2 pro panel and iX 2.20 SP2.

Workaround 2:
17-04-04: Note! We have seen issues with this setup depening on the Pluto and panel modell.
Problem initiating the communication on startup/reboot.
We highly recommend workaround 1.​

It´s possible to get this to work if a Westermo MDW-45 is connected between TxA/TxB/TxC and the Pluto.

RS485-cable between TxA/TxB/TxC and MDW-45 is Beijer standard cable CAB112 (- on CAB112 to terminal 3 on MDW-45, + on CAB112 to terminal 4 on MDW-45).

Crosswired RS232-cable between MDW-45 and standard Pluto RS232-cable, for example standard Beijer CAB30 with two male-male converters.

Switches that should be set to ON on the MDW-45:

2, 3, 4, 6 on S1

3, 4 on S2

Settings in iX Developer

• edw100.ini
• Pluto_iX.zip
• Pluto_PLCcode.sps

iX - Transparent Mode Qnn serial through an iX panel with Serial/IP

The following settings worked when I tested Serial/IP->iX Panel T7A -> Mitsubishi Q03 CPU (serial).

iX driver setup:

Serial/IP was set up as follows:

iX - Is it possible to send SMS when alarms are triggerd

Yes, and no.

The built in SMS service are using a Web SMS service. That means the panel must be connected to internet, and exchange it's alarms through a web service.

You cannot directly connect a Westermo GDW-11 to send SMS with a built in function. That has to be scripted.

iX - How to enter update mode for system software upgrade

Please see the attached document.

• TxA Update Mode.pdf

iX - How to enter the Service Menu to set a new IP address, calibrate touch etc

Please see the attached document.

• TxA Service Menu.pdf

Instructions for battery recharging (TxA)

The battery that you can find in our TxA panels is a rechargeable battery and needs to be charged for 2 days to be fully charged. This is important to do from time to time especially if the unit is used from time to time. It is hard to keep track when the battery level is going low so power the unit ON and keep tack of when the unit was charged the last time.

After the unit has been charged (powered ON) for 2 days the unit can be left without power for one month before it needs to be charged again. This only applies if the room temperature where the unit is kept does not exceed 25 degrees Celsius.

How to check what battery type your TxA is equipeed with

Part number that ends with 01 is equipped with a rechargeable battery.

Part number that ends with 02 is equipped with a non rechargeable battery.

TxA / TxB - MAC-CAB adaptor for use with old cabling

The schemacit belows shows an example of how an adaptor to connect a TxA or TxB panel to an older MAC-CAB cable originally made for a MAC50/90.

Windows CE versions, X2, iX, E1000

• WindowsCE_X2_iX_E1000_.xlsx

iX - QJ71C24 - Serial RS232 communication with iX panel

Setup: iX TxA/B and Q-CPU with QJ71C24 serial communication via RS232, using iX driver "QnA/Qnn Series C24".

Problem:
Communication error when following the help file suggestion of cable use. CAB104 will not work.

Solution:
*Create own cable according to the picture below.
*Possible solution could also be to use CAB5 + CAB12 + 2x Gender changer

• Drawing.png

iX TxA rev2 PCN (PDM_CDOC - 1030566 - 1 - A2) - 1

• iX TxA rev2 PCN (PDM_CDOC - 1030566 - 1 - A2) - 1.pdf

iX_EXTER_E1000_Environmental

• iX_EXTER_Environmental_PIEN144D.pdf
• iX_Mitsubishi_Environmental_PI00145C.pdf

iX TxA Environmental Impact Report _PDM_PROJ_DOC - 1015856 - 1 - A2_ - 1

• iX TxA Environmental Impact Report _PDM_PROJ_DOC - 1015856 - 1 - A2_ - 1.pdf

iX Panel TxA Maintenance Modes (PIEN282)

Maintenance of the iX Panel TxA is similar to maintenance of the other iX Panels, with a few important differences, described in this document.

• iX_TxA_Maintenance_PIEN282.pdf

​Guidelines for TxA and TxB migration to X2.

​​Guidelines for TxA and TxB migration to X2.

• iX TxA and iX TxB to X2 migration guidelines 2016-08-25.pdf
• iX TxA and iX TxB to X2 migration guidelines 2016-08-25.pptx

iX Scripting - How to control the built-in buzzer in TxA/B panels

Buzzer in TxA series:
There is a buzzer in TxA terminals.
It is similar in style to that of the E1000 buzzer but you need to script to make the buzzer work in IX.
The attaced sample shows how to control frequency an duration of the sound.

One miner drawback is that you HAVE to input a duration, which means it's not possible to make a sound, as long as a signal is on.

There is no way to control the volume of the sound, the built-in buzzer runs at a fixed volume.
There is however a frequency at which the buzzer is as loud as possible, that is at 2738,4 Hz.
If you want a variable frequency range, the buzzer is loudest between approx. 2500 - 3500 Hz

Buzzer in TxB series:
Works in same way as TxA.

• BuzzerSample.zip
• BuzzerSampleT7B.zip

iX - Script - Custom Login Dialog iX T7A

24.10.2014
IX 2.10 SP1

Attached IX T7A project use scripting to create a custom login dialogue, with proper\user adjustable size of buttons etc.

12.11.2018
Updated with 2.40SP1 an X2 Pro7 terminal

• CustomLoginDialog_T7A.zip
• CustomLoginDialog_T7A_220.zip
• CustomLoginDialog_X2Pro7.zip

iX SMS via GDW11

This program example makes it possible to send SMS messages directly from an iX application (iX panels or computer running iX) to a GDW11 (or other industrial modems). The program example does not rely on any online services, it simply sends SMS messages directly to an industrial GSM modem.

Note: The modem must be configured with correct parameters in order to work, see AutoModemSettings application for automatic initialization:
http://www.beij er.no/web/web_aut_no.nsf/docsbycodename/filearchive?OpenDocument&mylink=/web /BexFilePileAUT.nsf/fm.be.searchframe?openform&Lang=NO&DocID=EC67EA03B71 7708FC125767400422A1C&code=DSSS-7XYG7G

• Output Files .dll _ .chm (v 1.0.0.0).zip
• Sms_Sample.zip

iX - TxA / TxB / TxC Demo projects in iX Developer 2.40 SP6

• Demo_T10A.zip
• Demo_T10A_Example1.zip
• Demo_T12B_Example3.zip
• Demo_T12B_Example7.zip
• Demo_T15B_Example3.zip
• Demo_T15C_Example6.zip
• Demo_T4A.zip
• Demo_T4A_Example1.zip
• Demo_T7A.zip
• Demo_T7A_Example1.zip

Start-up: IPsec VPN tunnel to iX panel (KI00333)

• KI00333.pdf

Start-up: iX, FX3U-ENET(ADP) and FX3GE (KI00311)

Note, the FX3U-ENET module has a limitation of maximum 4 MC connections.

• KI00311A.pdf

iX T7AM Installation Manual

• iX_T7AM_MABP118A_Brazilian.pdf
• iX_T7AM_MACN118A_cn.pdf
• iX_T7AM_MADE118A_German.pdf
• iX_T7AM_MAEN118A_English.pdf
• iX_T7AM_MAES118A_Spanish.pdf
• iX_T7AM_MAFR118A_French.pdf
• iX_T7AM_MAIT118A_Italian.pdf
• iX_T7AM_MATW118A_tw.pdf

iX T7A Installation manuals

Installations manuals for operator panel iX T7A with preinstalled iX Runtime software.

Installation manuals exist in following language:
Chinese simplified
Chinese traditional
English
French
German
Italian
Portuguese
Spanish

Fold up exist in English language

• iX_T7A_MABP016F.pdf
• iX_T7A_MACN016F.pdf
• iX_T7A_MADE016F.pdf
• iX_T7A_MAEN016F.pdf
• iX_T7A_MAEN016F_Foldup.pdf
• iX_T7A_MAES016F.pdf
• iX_T7A_MAFR016F.pdf
• iX_T7A_MAIT016F.pdf
• iX_T7A_MATW016F.pdf

iX T10A Installation manuals

Installations manuals for operator panel iX T10A with preinstalled iX Runtime software.

Installation manuals exist in following language:
Chinese simplified
Chinese traditional
English
French
German
Italian
Portuguese
Spanish

Fold up exist in English language

• iX_T10A_MABP017F.pdf
• iX_T10A_MACN017F.pdf
• iX_T10A_MADE017F.pdf
• iX_T10A_MAEN017F.pdf
• iX_T10A_MAEN017F_Foldup.pdf
• iX_T10A_MAES017F.pdf
• iX_T10A_MAFR017F.pdf
• iX_T10A_MAIT017F.pdf
• iX_T10A_MATW017F.pdf

iX T4A Installation manuals

Installations manuals for operator panel iX T4A with preinstalled iX Runtime software.

Installation manuals exist in following language:
Chinese simplified
Chinese traditional
English
French
German
Italian
Portuguese
Spanish

Fold up exist in English language

• iX_T4A_MABP015F.pdf
• iX_T4A_MACN015F.pdf
• iX_T4A_MADE015F.pdf
• iX_T4A_MAEN015F.pdf
• iX_T4A_MAEN015F_Foldup.pdf
• iX_T4A_MAES015F.pdf
• iX_T4A_MAFR015F.pdf
• iX_T4A_MAIT015F.pdf
• iX_T4A_MATW015F.pdf

CiX-DP Mounting instructions X2 pro, X2 marine, X2 control, iX TxA/TxB, MAEN125

Apply also to iX TxA/TxB

• MAEN125.pdf

Driver help file for CiX-DP MPI/Profibus DP module

• Profibus_EM_Pre2_HelpFile.zip

GSD files for CiX-DP Profibus module

• BE09DA2.GSD
• BE09DA3.GSD